Environmental protection |
Product type |
Product name |
Appearance |
Using proportation |
Using method |
Using temperature |
Treatment time |
JYT- 2D |
Non-phosphor degreaser |
Liquid |
1.5~4% |
Spray |
55~65℃ |
1~8min |
Features and application:Non-phosphating environmental protection, oil-removal. |
JYT-2DF |
Non-phosphor degreaser |
Powder-Liquid |
2.5~6% |
Dipping and spray |
55~65℃ |
3~10min |
Features and application:
Non-phosphating environmental protection, reducing phosphating pollution. |
JYT- 2L |
Metal detergent |
Liquid |
3~10% |
Brush, washing |
|
|
Features and application:
Slight alkali, high washing efficiency with the characteristic of rust-proof. It is fit for manual washing and equipment maintenance. |
|
High-efficiency energy-saving |
Product type |
Product name |
Appearance |
Using proportation |
Using method |
Using temperature |
Treatment time |
JYT- 2A |
Normal temperature degreaser |
Powder |
5% |
Dipping |
Room temperature |
10~15min |
Features and application: Non-heating, energy saving. It is fit for oil removal. |
JYT- 2B |
Low-temperature high-efficiency degreaser |
Powder |
3~5% |
Spray, dipping |
45~65℃ |
1~7min |
Features and application: Removing sorts of oil with the characteristics of oil removing and low cost. |
JYT- 2C |
Low phosphating degreaser |
Powder-Liquid |
3~5% |
Dipping and spray |
55~65℃ |
1~3min |
Features and application: low comprehensive cost, speedy oil removing. |
JYT- 2E |
Galvanized degreaser |
Powder |
5~7% |
Dipping |
55~65℃ |
5~8min |
Features and application: it is fit fot electrolysis oil-removal and oil removal before galvanization. |
JYT- 2H |
Acid degreaser |
Liquid |
20~25% |
Dipping |
Room temperature |
5~15min |
Features and application:Match phosphorous acid, speedy oil-removal. |
JYT- 2F |
Precise fitting detergent |
Liquid |
5% |
Spray and brush |
Room temperature |
|
Features and application:It is fit for the washing of non ferrous metal and electronic component with little dosage and low comprehensive cost. |
JYT- 101 |
Normal temperature rust removal finishing agent |
Liquid |
Direct using |
Dipping |
Room temperature |
30~60min |
Features and application:
Quickly oil removal, energy saving and high efficiency. |
JYT- 102 |
Broad temperature oil-removal and rust removal finishing agent |
Liquid |
Directly using |
Dipping |
Room temperature~55℃ |
Proper |
Features and application: mixture acid and can be used at normal temperature. |
JYT- 103 |
Normal temperature multifunctional finishing agent |
Liquid |
1:3 |
Dipping |
Normal temperature |
Proper |
Features and application:
Oil removal and rust removal phosphating and passivation without water washing |
JYT-104D |
Medium temperature oil removal and rust removal additive |
Liquid |
8~10% |
Dipping |
45~70℃ |
5~15min |
Features and application:Match sulphuric acid with speedy oil removal and rust removal, low cost and well oil-removal effect. |
JYT- 105D |
Broad temperature oil removal and rust removal additive |
Liquid |
8~10% |
Dipping |
Room temperature~70℃ |
3~10min |
Features and application:
Match sulphuric acid with speedy oil removal at normal temperature. |